Intelligent Addressable Fire Alarm Control Panel FF FCP751


  • One full SLC circuit expandable to two
  • 3 programmable relays
  • 5.25A power supply
  • Large graphic display
  • Real time clock
  • Compatible with eMATRIX graphics annunciator
  • Powerful, network wide cause and effects (500 total). Fully user programmable by point or zone.
  • Can be networked with additional RS and/ or Elite control panels
  • Compatible with eVIEW Annunciator
  • Programmable through a PC connection to the panel
  • Same look and feel as Elite range
  • Stores 1000 last events in history log
  • Model ranges include with or without a Dual-Line internal DACT
  • Compact, stylish enclosure
  • Available in Red or Gray
  • 2 Programmable NAC circuits with internal synchronization support


Construction 16AWG sheet steel
Dimensions 14.5”W x 18.9”H x 4.25” D
Weight (without batteries) 20lb
Finish (lid & box) RAL3002 (Red) or BS 00 A 05 (Gray)
Finish (product labels) BS 00 A 05 (Gray)
Mains voltage supply 115 or 230V AC 50 or 60 Hz. (specify when ordering, default is 115V)
Mains supply fuse 1.6A 250V
Power supply DC rating 24V 5.25 Amps
Aux 24V supply Fused at 500 milliamps
Battery (24 hour standby) 9Ah 12V (2 per panel) (non-networked)
Fault contact rating 30V DC 1 Amp
Fire contact rating 30V DC 1 Amp
Alarm contact rating 30V DC 1 Amp
NAC output rating 3.1V across both channels, 2.3V across any one
Detection loop 250 milliamp output
Serial expansion port Serial RS485
PC port Serial RS232
Network connection Optional network Cards allow the use of e-Net networking or VESnet networking
NAC Synchronization Internal Support
NAC Protocols System Sensor, Wheelock, Gentex, Amseco